A distinctive feature of this machine is its low inertia, which is provided by the reduced mass of moving parts. This is especially important when welding of metals with high thermal and electrical conductivity (copper and aluminum alloys), hardly weldable steels and alloys. The machine provides not only high strength but also high plastic properties, which is especially important to ensure a continuous process of cold drawing wires.
Parameters |
|
Line voltage, V
|
380 |
Current consumption (during welding), A |
13 |
Wire diameter, mm |
3...8 |
Amount of welds (bands) per hour |
10...15 |
Time of welding, s |
0,9…2,0 |
Welding voltage, V |
2,8...3,2 |
Cooling |
water, self-contained |
Upset force, N |
200...450 |
Adjustment of the heat treatment |
continuous |
Boundary dimensions:Width (approx.) хHeight (approx.)хDepth (approx.),mm
|
280x540x430 |
Weight (net), approx,kg
|
105 |
This model take out of production from the 1 March 2018. Warranty package, as well as post-warranty service is carried out without changes.
|